Jeep Commander is one of those rugged vehicles that will always offer an extra bit of power. However, as with any vehicle, you may need to replace the engine at one time during its lifespan.
So how much does the Jeep Commander engine replacement cost? It will cost you between $2,000 to $8,500 to replace the engine in your Jeep Commander. But it would depend on if you are replacing it with a new or used engine, the engine type, the labor involved, and your car model. The cost can also vary depending on where you have it done.
While replacing the engine in your Jeep Commander can be expensive, it may be worth it if you want to keep your vehicle in good condition. Read on to learn more about the Jeep Commander engine replacement cost and what it entails.
Engine replacement is one of the most expensive repairs you will ever give to your vehicle, and it can be costly for a Jeep Commander.
The cost of an engine replacement for a Jeep Commander can vary greatly depending on
- The year
- Model of the vehicle
- The type of engine
- Where you are replacing it
Assuming you are replacing the engine with a new or remanufactured engine; it could cost anywhere between $2,000 and $8,500. If you are looking to replace your Jeep Commander engine with a used engine, it will cost you less but still between $1,000 and $4,000.
Additionally, the labor cost to replace the engine can range from $400 to $2,000, depending on where you have it done and the complexity of the job.
However, based on the typical labor costs mentioned above, it is possible to estimate the labor cost for engine replacement in a Jeep Commander as follows:
|Hourly Labor Rate||Total Hours||Total Labor Cost|
As shown in the table, the total labor cost for engine replacement in a Jeep Commander can range from $700 to $2,500, with an average cost of around $1,200 to $1,800.
It is important to note that these estimates are based on typical labor rates and do not include additional costs such as parts or other fees. However, always best to consult with a mechanic or dealership for a more accurate estimate of your vehicle’s total engine replacement cost.
Average Jeep Commander Engine Replacement Cost Table For Different Years And Different Types Of Engines:
|Year||Engine||Average Cost of Replacement|
|2005-2010||3.7 L PowerTech V6||$3,000-5,500|
|2005-2007||4.7 L PowerTech V8||$4,000-8,000|
|2008-2009||4.7 L PowerTech V8||$5,000-8,000|
|2005-2008||5.7 L Hemi V8||$5,500-8,500|
|2009-2010||5.7 L Hemi V8||$6,000-8,500|
|2006-2010||3.0 L OM642 Diesel V6||$2,000-6,000|
These prices are just an estimate, and the actual cost of an engine replacement may go higher or lower depending on the specific circumstances of your vehicle. Always contact a professional mechanic to assess the cost and what work is involved accurately.
The first step in replacing the engine in your Jeep Commander is determining which engine you need. This can be done by checking the engine VIN number or consulting a professional mechanic.
Once the engine type is determined, the next step is removing the old engine. Removal of the old engine requires draining fluids, disconnecting various hoses and wires, unbolting necessary components, and lifting out the engine.
If you are replacing the engine with a used one, this may require some additional work, such as cleaning or replacing parts. If you are replacing your engine with a new or remanufactured one, the process involves simply bolting in the new engine.
Once the new engine is in place, various components will need to be reconnected and fluids refilled. Finally, the engine will need to be tested for proper operation.
Replacing the engine in your Jeep Commander is a complex job that should be left to professionals. Imagine trying to lift a 400-pound engine out of a car or trying to align the various components precisely. This type of work should not be done by amateur mechanics and can further damage your vehicle.
It is best to consult a professional mechanic with experience with Jeeps and engine replacements to ensure the job is done correctly. This will also help you avoid any potential issues or injuries from attempting to do it yourself.
Before you can start panicking and budgeting for a Jeep engine replacement, you need to know if your vehicle needs one. There are several signs that could indicate an impending engine failure, and you should look out for them.
If the engine light on your Jeep Commander dashboard is consistently illuminated, this could be a sign that your engine is struggling. The engine light is designed to alert you to any potential issues within the engine. So if it stays on, it’s worth getting it checked out by a mechanic.
They can run diagnostics to see if there is a specific issue that needs addressing or if it’s a more serious problem requiring an engine replacement.
Seeing thick smoke coming from the tailpipe of your Jeep Commander is never a good sign. While it’s normal for some smoke to be produced during the combustion process, excessive smoke could indicate an issue with your engine.
For example, if you notice white smoke, this could be a sign of a blown head gasket or a problem with the cylinder head. Blue smoke could result from oil burning in the engine, which could be due to a faulty valve seal or worn-out piston rings.
However, if you notice thick smoke, it’s vital to get your Jeep checked out as soon as possible to avoid further damage to the engine.
A loud knocking noise coming from your Jeep Commander’s engine could indicate a severe issue you can’t ignore. This noise is often caused by a lack of lubrication in the engine, which can be due to a low oil level or a faulty oil pump.
In either case, address the issue as soon as possible to prevent further damage to the engine. If left unchecked, a knocking noise could lead to complete engine failure.
If you notice that your Jeep Commander is consuming more fuel than usual, it could be a sign of an issue with the engine. This could be due to a problem with the fuel system, such as a clogged fuel filter or a faulty fuel pump, or it could be a result of engine problems, such as a misfire or faulty spark plugs.
Either way, it’s worth getting your Jeep checked out to determine the cause and fix the issue before it leads to more serious problems.
Is your Jeep Commander’s engine stuttering or stalling? This could be a sign of a serious issue. Engine stuttering or stalling can be caused by a variety of issues, including a faulty ignition system, a clogged fuel filter, or a problem with the fuel pump.
In any case, it’s important to get your Jeep checked out to determine the cause and fix the issue before it leads to further engine damage.
Replacing the engine in your Jeep Commander can be costly, with prices ranging from $2,000 to $8,500 depending on the engine type, the year and model of the vehicle, and the labor involved.
However, it would be best to consult a professional mechanic for a more accurate estimate of the total cost and the work involved.
I am Rick Bofia, a Jeep mechanic with a wealth of experience in repairing and maintaining Jeeps of all models and ages. I take pride in my expertise in diagnosing and repairing complex Jeep problems, from engine and transmission issues to suspension and brake system repairs. My passion for Jeeps and my dedication to delivering top-quality services have earned me a reputation as a reliable and trustworthy mechanic in the Jeep community. Whether you need routine maintenance or major repairs, you can trust me to get your Jeep back on the road in optimal condition.