All Jeep Renegades require an oil change as part of their routine maintenance. Similarly, if your dashboard indication is flashing the oil change indicator, you should not ignore it. However, if the indicator is stuck on the signal and the light would not turn off, you are not alone.
How to make Jeep Renegade turn off the oil change light? Sometimes, changing the oil will not always make the light go away. This is because a failed sensor can also impact the performance of this indicator. However, owners can easily turn off the oil change light manually.
In this guide, we will learn how to turn off this light. In addition, we will discuss other factors related to the topic. So, continue reading till the end!
The oil change light is a red or orange indicator visible on the dashboard of your vehicle. When this light comes on, it is a sign that the oil in the engine needs to be changed. Not only that, but this indication also comes up if the oil is dirty, low, or there is a leak.
The light on your dashboard often comes up when there is a sensor failure. In cases like these, getting an oil change will not be helpful, and the light will still be there. But the method of turning off the indicator is easy. So, take a look at the steps.
Step 1: Turn on the ignition of your Jeep Renegade.
Step 2: Do not step on the brake pedal and let the engine start.
Step 3: Step on the gas pedal of the vehicle within 10 seconds of turning the engine on.
Step 4: Slowly push the gas pedal down to the floor three times. This will reset the lights on your dashboard.
Step 5 Lastly, turn off the ignition and start the car again.
Tip: If the reset does not work the first time, repeat the entire process correctly.
As we mentioned earlier, the oil change light indicates that the oil level in your vehicle is either low or dirty. On top of that, it also indicates towards oil leak. When you see the signal on your dashboard, inspecting the reason behind it is important.
Checking the engine oil of your Jeep Renegade is nothing complicated. If you need to learn how to check the oil level, take a look at the owner’s manual. The manual will help you to locate the dipstick of the vehicle.
Open the Jeep hood and lift the dipstick out of the vehicle. Wipe it clean with a piece of cloth or rag. Dip the stick back into place and lift it out again. See the engine oil level on the dipstick and ensure that it is up to the mark.
Refill the oil in the engine and check again with the dipstick. However, make sure that you do not overflow the tank.
Dirty engine oil is also responsible for the indicator. Checking the quality of the oil is similar to the level check. Pop the hood open and locate the dipstick. Take it out and wipe it clean with a cloth or rag.
Usually, the oil will have a transparent color with a runny consistency. However, the oil is dirty if the consistency is thick with a strange smell and dark color. In this case, you will have to get an oil change done.
Lastly, checking for engine oil leakage is also important. If you suspect a leak, check whether there are any traces or puddles under the vehicle. In case there are no visible leaks but you are still not sure, take the vehicle for an inspection. The experts will inspect the Jeep, find the leak, and repair it.
Many people have several queries about the Jeep Renegade engine oil light. Take a look at some of the most frequently asked questions!
How To Clear The Jeep Renegade Oil Change Indicator?
The best way of getting rid of this indicator is to reset it. To reset the light, turn the engine on without stepping on the brakes. Step the gas pedal to the floor three times to reset the indicator. Turn the Jeep off and start it again. Repeat the entire process if the resetting does not work, or take the car to a mechanic.
How Much Does Oil Change Cost?
The oil change is a simple process but make sure that you get it done by professionals. This cost typically ranges from $50 to $75. However, if your Jeep Renegade needs synthetic oil, the overall cost will be higher. And the bill will range from $90 to $130.
How Long Does The Indicator Stay On?
The light will continue to stay on until you change the engine oil. Once the problem is resolved, the indicator will go away. However, if it stays on even after you change the oil, take the vehicle to an auto repair shop for a proper inspection.
Can I Drive With A Oil Change Light?
If the indicator comes on when driving, make sure to pull the vehicle over and inspect the issue. Shut the engine off and ensure that there are no leaks and the oil is in proper condition. If the oil is not the issue, reset the vehicle to make the indicator disappear.
Every vehicle in the industry requires several types of repairs and replacements. The various indicators on your car’s dashboard refer to the condition and whether it needs to be checked or not. An oil change indicator is often a result of sensor failure and a false alarm.
Now that you know how to make Jeep Renegade turn off the oil change light, you can easily solve the problem. If you face this issue, take help from this guide to fix it without any trouble. Best of Luck!
I am Rick Bofia, a Jeep mechanic with a wealth of experience in repairing and maintaining Jeeps of all models and ages. I take pride in my expertise in diagnosing and repairing complex Jeep problems, from engine and transmission issues to suspension and brake system repairs. My passion for Jeeps and my dedication to delivering top-quality services have earned me a reputation as a reliable and trustworthy mechanic in the Jeep community. Whether you need routine maintenance or major repairs, you can trust me to get your Jeep back on the road in optimal condition.