How Much Does A Jeep Wrangler Battery Replacement Cost? [Battery And Labor Cost]

Once a vehicle’s battery is depleted, it is necessary to replace it with a new one to keep the vehicle running. The price of such replacement batteries varies, but how much does a Jeep Wrangler battery replacement cost, including installation?

A Jeep Wrangler battery replacement cost ranges from around $250 to upwards of 350$, depending on the type and size of battery you need. The newer models typically require a larger battery, which will be more expensive.

Walk through the guide to learn more about how much money you should carry if you replace your Jeep Wrangler’s battery and some other relevant facts.

How Much Does A Jeep Wrangler battery replacement cost?

As I said before, the battery replacement of a Jeep Wrangler costs from $250 to $350. Now the question is, does it include the installation cost? Yes, it does. The labor cost and the installation charge may vary from state to state.

How much does a Jeep Wrangler battery cost solely? Well, the battery costs around $200 to $280. To know the exact cost of a Jeep Wrangler battery replacement, you need to know the specific model year and engine type. Many Jeep dealerships offer free estimates for battery installation.

In addition to the battery, labor costs are also necessary when replacing it. Depending on your location, labor charges may vary from around $50 to more than $100.

Additionally, the cost may be higher if your Jeep has additional features, such as an aftermarket audio system or other electrical components. Therefore, determine exactly what type and size of battery your Jeep Wrangler needs before shopping for a replacement.

When Do You Need To Replace The Battery Of Your Jeep Wrangler?

There are several symptoms when you need to replace the battery of your Jeep Wrangler.

1. Engine Is Not Starting

When the battery is new, and in good condition, it should start your engine without any issues. But, when you find that the engine is not starting, or if it takes longer than normal to start it. could indicate that your battery has gone bad and needs to be replaced.

2. Warning Light Is Blinking On The Charging System Or Battery

If you see a warning light blinking on the charging system or battery, it could indicate that your battery is either not holding enough charge or has gone bad.

3. Dim Headlights

If you notice that your headlights have dimmed, it could be due to a weak or dying battery. This is because your headlight bulbs consume more power than any other part of the car, so if there’s something wrong with the battery, they will be the first thing to show it.

4. Unusual Corrosion Build-Up

Corrosion on your battery terminals or elsewhere can mean it can no longer hold a charge. When this happens, the corrosion will need to be cleaned for the new battery to function properly.

5. Other Electric Issues

If you have been having other electrical problems, such as the audio system, radio static, or windows not going up and down, then it could be due to the battery being unable to hold a charge.

6. Battery Is Old

Last but not least, if your battery has been in use for several years, it may be best to replace it with a new one. Batteries are designed to last only so long, and eventually, they need to be replaced in order for the vehicle to continue running smoothly.

How Long Does It Take To Replace A Jeep Battery?

Replacing the battery in a Jeep Wrangler typically takes up to an hour, depending on your experience level and the tools you have available. If this is your first time replacing a car battery, then it may take more time.

In that case, it might be best to contact a professional auto mechanic for help. This will ensure that the job is done correctly.

How To Replace The Jeep Wrangler Battery: Step-By-Step

Here is a step-by-step guide on how to replace the battery in a Jeep Wrangler.

• Step 1. Make sure the car is in the park, and then turn off all electrical components such as the radio, lights, and air conditioner.
• Step 2- Open the hood of your Jeep Wrangler and locate the battery. It should be located near the front of the engine bay on either side of the vehicle.
• Step 3- Disconnect the negative battery cable first, followed by the positive cable.
• Step 4- Loosen the bolts that hold the battery in place.
• Step 5- Remove the old battery from its compartment and set it aside.
• Step 6- Clean any corrosion off of the terminals using a wire brush or baking soda solution if necessary.
• Step 7- Install the new battery in its designated area, making sure that it is facing the same way as the old one.
• Step 8- Connect the positive battery cable followed by the negative cable.
• Step 9- Start your Jeep Wrangler and check to make sure everything is working correctly.

What Type Of Battery Does My Jeep Wrangler Need?

Jeep Wrangler batteries vary in size and kind depending on the model year, engine size, and other factors.

For example, the latest Jeep Wrangler and Jeep Gladiator require an H6 or Group 48 battery. Also, OPTIMA provides an H6 YELLOWTOP battery.

Usually, you may learn this from your car’s manual or by seeing a qualified mechanic. So that it functions properly and lasts as long as possible, your car needs a specific kind of battery.

FAQs

Answering some relevant and frequent questions will give you more insight into the Jeep Wrangler Battery facts.

Conclusion

On average, replacing a Jeep Wrangler battery ranges from $250 to $350. But this amount can vary depending on your location.

If you suspect your Jeep’s battery is malfunctioning or not performing, replace it as soon as possible. Replacing a Jeep Wrangler battery is an easy task you can do on your own if you have the right tools and knowledge.

It only takes an hour to complete the replacement process correctly. However, if you are not confident in your skills, it may be best to contact a professional auto mechanic.